Industrial Electronics

Inverter/convertor/ups/generartor


Industrial Electronics

 

What is UPS?

An Uninterruptible Power Supply is a device connected between the power source and a load (computer, fan, TV, etc.) to ensure that electrical flow is not interrupted. It is also called uninterruptible power source, UPS or battery/flywheel backup. UPS systems devices Use batteries to keep the load running for a period of time after a power failure. UPS systems cannot be confused with standby generators which do not provide protection from a momentary power interruption, or which may result in a Momentary power interruption when it is switched into service, whether manually or automatically. UPS systems usually provide protection against power surges, brownouts and line noise as well.

What is called "Inverter"?
The main power AC is supplied to the inverter, and it is transformed into DC simultaneously, which keeps charging the battery continuously. Inverter’s output voltage is always dependent upon input voltage. There is a sensor and relay structure that always monitors the ON or OFF status of the main. Then it changes the DC power from the battery to AC current, and that flows to the electronic equipment. However, SIMTEK pure sine wave inverters available today that make the use of UPS redundant as they can supply uninterrupted power supply in the case of a power failure.

What is difference between “UPS & Inverter"?
While both devices provide backup power during mains outage, the only difference is the time lag. While a UPS instantly starts supply, with an inverter there is a lag of around half a second which is unacceptable if the device is a computer that you are working upon. For the rest of the appliances, however, this time lag is acceptable and this is the reason UPS is used only for computers whereas inverters are used for all other household and office appliances.

An Uninterruptible Power Supply is a device connected between the power source and a load (computer, fan, TV, etc.) to ensure that electrical flow is not interrupted. It is also called uninterruptible power source, UPS or battery/flywheel backup. UPS systems devices Use batteries to keep the load running for a period of time after a power failure. UPS systems cannot be confused with standby generators which do not provide protection from a momentary power interruption, or which may result in a Momentary power interruption when it is switched into service, whether manually or automatically. UPS systems usually provide protection against power surges, brownouts and line noise as well.

 

What’s the usage of UPS?
Every UPS will supply power to load (such as a computer, fan, TV, lights or medical equipment) when mains power fails. It may also regulate the power and prevent the spikes, brownouts, interference and other unwanted problems from damaging the supported equipment.
 
How long can the UPS support for my equipment running?
As long as you want, providing you buy enough batteries and the charging system is up to it. After about eight hours it`s usually more cost-effective to buy a generator, with a short runtime UPS to bridge the generator start-up gap.
 
What`s lifetime of a UPS? 
Most plug-in UPS are good for at least seven years. We`d advise you to change the batteries every twelve months to eighteen months.
  
What is called "Off-line UPS"?
In this type of UPS, the primary power source is line power from the main utility, and the secondary power source is the battery. The battery charger is using line power to charge the battery, and the battery and inverter are waiting "on standby" until they are needed. When the line power fails, the transfer switch changes to the secondary power source. When line power is restored, the UPS switches back. 
 
What is called "Line Interactive UPS"?
Line Interactive UPS under normal condition smooth’s and to some degree regulates the input AC voltage by a filter and a tap-changing transformer. The bi-directional inverter/charger is always connected to the output of the UPS and uses a portion of AC power to keep the battery charged. When the input power fails, the transfer switch disconnects AC input and the battery/inverter provides output power. Its typical efficiency is 90-96%. This type is currently the most common design in 500 VA - 2000 VA power range.


Address & Contact

Address:
Plot No.64 FJ Block Wah Model Town Phase 3 Punjab Pakistan
Contact Number:
(0092) / (0)
City:
Wah

(Advertisement)

Photo Gallery

Map & Directions

Your Business location must be displayed on Google Maps and if it's not visible then Login and readjust your business address until its visible. Your little effort will make your business visible on the Google Map

Related Pages : Pages you may like

Comments: Send Us a Message in Comments ; Add a Comment and Press Enter

Tell us: How can we help; Wait for our reply, Company will reply to your comments shortly. We will reply only to Add a Comment : Press Enter after writing

Share This Page

Your Liking and sharing page on social media platforms will not only make your own business stronger but ultimately Pakistani Business will also increase and expand so we request you to share business on Social Media sites and interlink it with enic and vice versa.

If you want to contact website admin then leave a message with your email


Disclaimer:

All content posted by the user in the form of Offers/Products/Company Profiles/Images etc. is the responsibility of the user and Enic.PK shall not be held liable for any such content in any way.